Hunan New Diamond Construction Machinery Co., Ltd.
Hunan New Diamond Construction Machinery Co., Ltd.
Add to Cart
Description
The new diamond dart impactor uses the latest drilling theory to design impactor, which enables the impactor to get the best energy transfer, fast drilling speed and low air consumption. The best quality of raw materials and the most advanced processing technology, stable performance and long life. Easy to use, easy to install and disassemble, easy to repair and easy to repair.
1. Based on previous experience of ordinary hammers, combined with the features of reverse circulation hammer, optimized internal structure and ideal energy transfer, thus ensuring the series of hammers drilling with fast, smooth and continuous sampling.
2. The internal structure is very simple with components of high rigidity, thus ensuring long life and easy maintenance of the hammer.
3. The collection tube adopts an integrative design and can be replaced without disassembling the hammer. With carburizing treatment, it has good abrasive resistance.
4. Equipped with bits designed with patent. Simply by replacing the drill bit, the same hammer
can drill holes of different sizes ensuring that the sample is not contaminated.
5. In difficult conditions such as loose soil, hard rock and plenty of water exists, sampling can be done well.
Applications
Widely used in mines, quarries, earthworks and other engineering drilling blasting hole, guardrail hole, mountain reinforcement, anchorage and other engineering holes, geothermal exploration hole, Well bore and other fields.
Specifications
| N Series High Air Pressure DTH Hammers Without Foot Valve Technical Data | |||
| Length(Without Bit) | N100A | N120A | N125A |
| 1545mm | 1880mm | 1880mm | |
| Weight(Without Bit) | 305.00kg | 475.00kg | 470.00kg |
| External Diameter | Ø226mm | Ø275mm | Ø275mm |
| Bit Shank | NUMA100 | NUMA120 | NUMA125 |
| Hole Range | Ø254-Ø311mm | Ø305-Ø445mm | Ø305-Ø445mm |
| Connection Thread | API4 1/2REG API5 1”/2REG | API5 1/2REG API6 5”/8REG | API5 1/2REG API6 5”/8REG |
| Working Pressure | 2.0-3.5Mpa | 2.0-3.5Mpa | 2.0-3.5Mpa |
| Impact Rate at 17 Bar | 20HZ | 20HZ | 20HZ |
| Recommended Rotation Speed | 15-25r/min | 15-25r/min | 15-25r/min |
| Air Consumption | 1.0Mpa:22.0m³/min 1.8Mpa:40.0m³/min 2.4Mpa:65.0m³/min | 1.0Mpa:28.0m³/min 1.8Mpa:50.0m³/min 2.4Mpa:71.0m³/min | 1.0Mpa:28.0m³/min 1.8Mpa:50.0m³/min 2.4Mpa:71.0m³/min |
Feature Advantage
Characteristic advantage
1 adopts the industry's leading heat treatment technology, and the steel hardness and wayward products are in the leading position.
2 alloy teeth adopt professional technology to greatly improve the strength of alloy teeth.
3 perfect after-sales security system and after-sales service tracking, the perfect solution to any problem of customers.
The appearance of the picture is different from that of the actual product, and the actual product is the standard.
| N Series High Air Pressure DTH Hammers Without Foot Valve | |||
| Item Description | Weight(kg) | ||
| N100A | N120A | N125A | |
| 1,Top Sub | 59.00 | 70.00 | 70.00 |
| 2,“O” Ring Of Top Sub | 0.03 | 0.04 | 0.04 |
| 3,Breakout Ring | 0.50 | 0.80 | 0.80 |
| 4,Chenck Valve | 1.40 | 2.00 | 2.00 |
| 5,Spring | 0.30 | 0.10 | 0.10 |
| 6,Air Distributor | 10.50 | 16.00 | 16.00 |
| 7,Internal Cylinder | 12.50 | 25.00 | 25.00 |
| 8,Piston | 77.00 | 113.00 | 113.00 |
| 9,External Cylinder | 110.00 | 170.00 | 170.00 |
| 10,Guided Sleeve | 4.50 | 25.00 | 23.00 |
| 11,“O” Ring Of Stop Ring | 0.02 | 0.01 | 0.01 |
| 12,Stop Ring | 1.90 | 4.50 | 4.00 |
| 13,Breakout Ring | 0.50 | 0.80 | 0.80 |
| 14,Drive Chuck | 25.50 | 48.00 | 45.00 |
| 15,Drill Bit | 106.00 | 164.00 | 175.00 |